Users Guide

Racdump includes the following subsystems and aggregates the following RACADM commands. For
more information on racdump, see the Chassis Management Controller for Dell PowerEdge M1000e
RACADM Command Line Reference Guide.
Subsystem RACADM Command
General System/RAC information
getsysinfo
Session information
getssinfo
Sensor information
getsensorinfo
Switches information (IO Module)
getioinfo
Mezzanine card information (Daughter card)
getdcinfo
All modules information
getmodinfo
Power budget information
getpbinfo
KVM information
getkvminfo
NIC information (CMC module)
getniccfg
Redundancy information
getredundancymode
Trace log information
gettracelog
RAC event log
gettraclog
System event log
getsel
Downloading SNMP Management Information Base (MIB) File
The CMC SNMP MIB File defines chassis types, events, and indicators. CMC enables you to download the
MIB file using the Web Interface.
To download the CMC's SNMP Management Information Base (MIB) file using the CMC Web interface:
1. In the system tree, go to Chassis Overview and click Network → Services → SNMP.
The SNMP Configuration section is displayed.
2. Click Save to download the CMC MIB file to your local system.
For more information on the SNMP MIB file, see the Dell OpenManage Server Administrator SNMP
Reference Guide at dell.com/support/manuals.
First Steps to Troubleshoot a Remote System
The following questions are commonly used to troubleshoot high-level problems in the managed
system:
• Is the system powered on or off?
• If powered on, is the operating system functioning, crashed, or frozen?
• If powered off, did the power turn off unexpectedly?
241