Users Guide

Servers BIOS iDRAC Lifecycle Controller
PowerEdge M805 2.3.3 1.65 Not Applicable
PowerEdge M905 2.3.3 1.65 Not Applicable
PowerEdge M610 6.3.0 3.50 1.6
PowerEdge M610x 6.3.0 3.50 1.6
PowerEdge M710 6.3.0 3.50 1.6
PowerEdge M710HD 7.0.0 3.50 1.6
PowerEdge M910 2.9.0 3.50 1.6
Power Edge M915 3.0.4 3.50 1.6
PowerEdge M420 2.0.22 1.50.50 1.3.0
PowerEdge M520 2.0.22 1.50.50 1.3.0
PowerEdge M620 2.0.19 1.50.50 1.3.0
PowerEdge M820 2.0.21 1.50.50 1.3.0
PowerEdge M630 0.4.3 2.05.05.05 2.05.05.05
NOTE: PowerEdge PSM4110 is supported by the Array Software version 6.0.4.
Supported Remote Access Connections
The following table lists the supported Remote Access Controllers.
Table 6. Supported Remote Access Connections
Connection Features
CMC Network Interface ports
• GB port: Dedicated network interface for the CMC Web interface.
Two 10/100/1000 Mbps ports; one for management and the other
for chassis to chassis cable consolidation.
• STK: Uplink port for chassis to chassis management network cable
consolidation.
• 10 Mbps/100 Mbps/1 Gbps Ethernet through CMC GbE port.
• DHCP support.
• SNMP traps and email event notification.
• Network interface for the iDRAC and I/O Modules (IOMs).
• Support for Telnet/SSH command console and RACADM CLI
commands including system boot, reset, power-on, and shutdown
commands.
Serial port
• Support for serial console and RACADM CLI commands including
system boot, reset, power-on, and shutdown commands.
• Support for binary interchange for applications specifically designed
to communicate with a binary protocol to a particular type of IOM.
• Serial port can be connected internally to the serial console of a
server, or I/O module, using the connect (or racadm connect)
command.
20