Users Guide

The slot name setting does not extend to the optional iKVM. The slot name information is available

through the iKVM FRU.

The slot name setting in the CMC Web interface always overrides any change you make to the display

name in the iDRAC interface.

To edit a slot name using the CMC Web interface:

1. In the system tree, go to Chassis Overview → Server Overview and then click Setup → Slot Names.

The

Slot Names page is displayed.

2. In the Slot Name field, edit the slot name. Repeat this step for each slot you want to rename.

3. To use the server’s host name as slot name, select Use Host Name for the Slot Name option. This

override the static slot names with the server’s Host Name (or system name), if it is available. This

requires the OMSA agent to be installed on the server. For more details on the OMSA agent, see the

Dell OpenManage Server Administrator User's Guide.

4. Click Apply to save the settings.

5. To restore the default slot name (SLOT-01 to SLOT-16, based on the server's slot position) to the

server, click Restore Default Value.

Configuring iDRAC Network Settings

You can configure installed or newly inserted server's iDRAC network configuration settings. A user can

configure one or more installed iDRAC devices. The user can also configure the default iDRAC network

configuration settings and root password for severs that are installed later; these default settings are the

iDRAC QuickDeploy settings.

For more information about iDRAC, see the iDRAC User’s Guide at dell.com/support/manuals.