Release Notes

Versions/Systems Affected
All CMC versions including CMC 5.0.
Issue 4:
Description
When you add a member chassis to a chassis group using the Multi-Chassis Management feature, you
cannot specify the group members with an IPv6 address.
Resolution
None
Versions/Systems Affected
All CMC versions including CMC 5.0.
Issue 5:
Description
While running "racadm getactiveerrors" command, module ID for server errors
is displayed as a slot number, for example 1,2,3, and so on.
Resolution
None
Versions/Systems Affected
CMC 5.0
Installation
Prerequisites
For information on pre-requisites, see the Dell PowerEdge M1000e Chassis Management Controller
Firmware Version 5.0 User's Guide
.
For information on Hardware and Software requirements, see the
Dell PowerEdge M1000e Chassis
Management Controller Firmware Version 5.0 User's Guide
.
For information on Installation and Configuration, see the
Dell PowerEdge M1000e Chassis Management
Controller Firmware Version 5.0 User's Guide
.
Installation Instructions
For information on installation, see the Dell PowerEdge M1000e Chassis Management Controller
Firmware Version 5.0 User's Guide
.
Upgrade
See the Prerequisites section for the correct version numbers.