Reference Guide
• Check if Display Host names is active (1 = Active).
racadm getslotname -h
getssninfo
Description
Displays a list of users that are connected to CMC. The following information is displayed:
• Session ID
• Username
• IP address (if applicable)
• Session type (for example, serial or Telnet)
• Login date and time in MM/DD/YYYY HH:MM:SS format
NOTE: Based on the Session ID (SSNID) or the user name (User), the CMC administrator can
close the respective sessions or all the sessions using the closessn subcommand. For more
information, see closessn.
Synopsis
racadm getssninfo [-u <username> | -u *] [-A]
Input
• -u — displays only sessions associated with a specic user.
• -A — does not display headers or labels.
Example
racadm getssninfo
SSNID
Type User IP Address Login Date/Time
6 GUI root 192.168.0 04/07/2010 12:00:34
Display the details of sessions without header
racadm getssninfo -A
"43584" "SSH" "root" "192.168.0" "11/26/2014 18:37:03"
• Display all currently active sessions for a specic user
racadm getssninfo -u root
getsvctag
Description
Displays the service tag of the host system.
Synopsis
racadm getsvctag [-m <module>]
Input -m <module> — Must be one of the following values:
• chassis
• server-<n> — where n = 1–16
• server-<nx> — where n = 1–8; x = a, b, c, d (lower case)
• switch-<n> — where n = 1–6
Output Any system tag as applicable.
Example
• Display Service tag of Server in Slot 1
racadm getsvctag -m server-1
53