Quick Reference Guide

• 1 — IP Address, subnet mask and gateway are
assigned from the DHCP server.
Default 0 — Do not use DHCP
NOTE:
If this object is modified, then the object cfgNicUseDhcp is also modified.
cfgDNSStaticServer2(Read/Write)
Description Specifies the static IP address for DNS server 2.
Legal Values A Valid IPv4 Address
Default 0.0.0.0
cfgDNSStaticDomainName(Read/Write)
Description The DNS static domain name.
Legal Values String of up to 254 ASCII characters. Characters are
restricted to alphanumeric, hyphens, and periods. At least
one of the characters should be alphabetic.
NOTE:
Microsoft Active Directory only supports Fully
Qualified Domain Names (FQDN) of 64 characters or
fewer length.
Default Null
cfgDNSStaticDomainNameFromDHCP (Read or Write)
Description Specifies the device DNS static domain name.
Legal Values
• 0 — Do not use DHCP to get the Domain Name
• 1 — Use DHCP to get the Domain Name
Default 0 — Disabled
cfgRemoteHosts
This group provides properties that allow configuration of the SMTP server for e-mail alerts.
For CMC, this group enables/disables and configures firmware updates, NTP, remote syslogging, and SMTP email
alerting. Use the -m option to apply this setting to iDRAC.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the
cfgRemoteHosts group.
141