Owner's Manual

This readme contains information for CMC 4.31.
The Dell Chassis Management Controller (CMC) is a hot-pluggable systems management hardware and software solution
designed to provide the following functions for Dell PowerEdge M1000e chassis system:
• Remote management capabilities
• Power control
• Cooling control.
What’s New
The following are the new features in this release:
• Includes features released in CMC 4.30
• Fixed propagation of CMC port speed setting to standby CMC, when not in auto-negotiate mode
• Security fix
Criticality
1 Critical
Hardware and Software Requirements
For information on Hardware and Software requirements see the Dell Chassis Management Controller Firmware Version 4.30
User's Guide.
Installation
For information on Installation see the Dell Chassis Management Controller Firmware Version 4.30 User’s Guide.
Prerequisites
For information on Pre-requisites see the Dell Chassis Management Controller Firmware Version 4.30 User’s Guide.
Supported Systems
CMC version 4.3 is supported on the following Dell PowerEdge(TM) systems in the Dell PowerEdge M1000e
system enclosure:
• Dell PowerEdge M420
• Dell PowerEdge M520
• Dell PowerEdge M600
• Dell PowerEdge M605
• Dell PowerEdge M610
• Dell PowerEdge M610X
• Dell PowerEdge M620