Reference Guide

Input

• (none) - Displays the version information for all targets or devices.

• -m <

module

> - Specifies the module or device for which you want to retrieve the version

information.

module

> is one of the following:

– server-nx where

=1-8 ;

= a,b,c,d

– cmc-n where n= 1 or 2. For example, cmc-2.

• -c - Displays the server's current CPLD version.

• -b - Displays the server's current BIOS version (default is iDRAC version).

• -l - Displays the firmware versions of available server components.

• -f <

filter

> - Filters the components. Must be used with -l and be one of the following values:

– bios: BIOS

– idrac: iDRAC

– usc: Lifecycle Controller (Unified Server Configurator)

– diag: 32-bit Diagnostics

– drivers: OS Driver Package

– nic-x: Network Interface card. See -l output for possible values of x

– raid-x: Raid Controller. See -l output for possible values of x

NOTE: The -b, -c and -l options are not available for CMC modules.

NOTE: The -l option requires that the Lifecycle Controller service is enabled on the servers. For

version information, see the RACADM Readme available at dell.com/support/manuals.

Example

• racadm getversion

• racadm getversion -f idrac

Example

racadm getversion -m server-15

server-15 2.00(Build 10) PowerEdgeM605 iDRAC N

racadm getversion

server-2 1.50 PowerEdgeM600 iDRAC Y

server-3 2.10 PowerEdgeM610 iDRAC Y

server-4 1.50 PowerEdgeM605 iDRAC Y

cmc-1 2.10.X06.200906

080825

racadm getversion -c

server-1 PowerEdgeM600