Reference Guide

Performance = 7000 W (6130
BTU/hr)
Redundancy Policy
= None
Dynamic PSU Engagement Enabled
= No
[Power Budgeting]
System Input Max Power
Capacity = 0 W
Input Redundancy
Reserve = 0 W
Input Power Allocated to
Servers = 0 W
Input Power Allocated to Chassis
Infrastructure = 51W
Total Input Power Available for
Allocation = 0 W
Standby Input Power
Capacity = 0 W
getraclog
Description The getraclog command displays RAC or CMC log entries.
On local racadm, when you run this command, the data is exposed to RACADM as a USB partition
and may display a pop-up message.
Synopsis
racadm getraclog -s <start record> -c <count>
For CMC:
racadm getraclog -i [-A]
racadm getraclog [-A] [-c <count>] [-s <start-record>] [--more]
Input
• -c — Specifies the number of records to display. On local racadm, if this parameter is not
specified, by default 100 logs are retrieved.
• -i — Displays the number of entries in the RAC or CMC log.
• --more — Displays one screen at a time and prompts you to continue (similar to the UNIX
more command).
• -s — Specifies the starting record used for the display.
• -A — Displays the output with no headers or labels.
NOTE:
• If no options are provided, the entire log is displayed.
• -i option is not applicable for iDRAC.
Output
For iDRAC:
SeqNumber = 286
Message ID = USR0005
Category = Audit
AgentID = RACLOG
Severity = Information
Timestamp = 2012-10-05 06:25:27
Message = Login failed from processdisco06a: 10.92.68.245
Message Arg 1 = processdisco06a
82