Users Guide

ManualsBrandsDell ManualsNetworkingChassis Management Controller Version 4.3

221

222

223

224

225

226

227

228

229

230

Table 55. Server Status

Item Description

Example: Server 1, Server 2, etc. Name/Location.

No Errors If there are no errors, then No Errors is displayed;

otherwise error messages are listed. The critical errors

are listed first, and then the warnings. For more

information, see "LCD Error Messages".

Slot Name Chassis slot name. For example, SLOT-01.

NOTE: You can set this table through the CMC CLI or

Web GUI.

Name Name of the server, which the user can set through Dell

OpenManage. The name is displayed only if iDRAC has

finished booting, and the server supports this feature, else

iDRAC booting messages are displayed.

Model Number Displays if iDRAC finished booting.

Service Tag Displays if iDRAC finished booting.

BIOS Version Server BIOS firmware version.

Last POST Code Displays the last server BIOS POST code messages string.

iDRAC Firmware Version Displays if iDRAC finished booting.

NOTE: iDRAC version 1.01 is displayed as 1.1. There is

no iDRAC version 1.10.

IP4 <enabled, disabled> Displays the current IPv4 enabled state.

IP4 Address: <address, acquiring> Only displays if IPv4 is enabled.

IP6 <enabled, disabled> Only displays if iDRAC supports IPv6. Displays current

IPv6-enabled state.

IP6 Local Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.

IP6 Global Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.

FlexAddress enabled on Fabrics Only displays if the feature is installed. Lists the fabrics

enabled for this server (that is, A, B, C).

The information in Table 17-16 is dynamically updated. If the server does not support this feature, then the following

information does not appear, else Server Administrator options are as follows:

• Option “None” = No strings must be displayed on the LCD.

• Option “Default” = No Effect.

• Option “Custom” = Allows you to enter a string name for the server.

The information is displayed only if iDRAC has completed booting. For more information on this feature, see the

RACADM

Command Line Reference Guide for iDRAC7 and CMC

228