Quick Reference Guide

• -c — Sets the chassis name or location.
Example
racadm setsysinfo -c chassisname "Dell
Rack System"
The chassis name was set successfully.
sshpkauth
Description Enables you to upload and manage up to 4 different SSH
public keys per user. You can upload a key file or key text,
view keys, or delete keys.
This command has three mutually exclusive modes—
upload, view, and delete that are determined by the
options.
Upload
The upload mode allows you to upload a keyfile or to copy
the key text on the command line. You cannot upload and
copy a key at the same time.
Local and Remote RACADM:
racadm sshpkauth -i <2 to 16> -k <1 to
4> -f <filename>
racadm sshpkauth -i <2 to 16> -k <1 to
4> -t
<key-text>
Telnet/ssh/serial RACADM:
racadm sshpkauth -i <2 to 16> -k <1 to
4> -t
<key-text>
View
The view mode allows the user to view a key specified by
the user or all keys.
racadm sshpkauth -i <2 to 16> -v -k <1
to 4>
racadm sshpkauth -i <2 to 16> -v -k all
Delete
The delete mode allows the user to delete a key specified
by the user or all keys.
racadm sshpkauth -i <2 to 16> -d -k <1
to 4>
racadm sshpkauth -i <2 to 16> -d -k all
Synopsis
racadm sshpkauth
Input
• -i < user index > - Index for the user. < user index >
must be between 2 to 16 on iDRAC.
• -k [< key index > | all] - Index to assign the PK key
being uploaded. all only works with the -v or -d
93