Quick Reference Guide

raid
Description Allows you to execute commands to control RAID arrays.
To use this subcommand for CMC you must have Chassis Administartor privilege and for iDRAC
you must have Configure iDRAC permission.
Synopsis
racadm raid
Example
• Monitor Health of Storage root node
racadm raid get status
Storage Root Node Status : Ok
The above command retrieves the controllers keys, (FQDDs.)
• Monitor and Inventory all Controllers connected to the server
racadm raid get controllers
racadm raid get controllers -o
The above command is an optimized version and displays the full controller objects along with their keys.
racadm raid get controllers -o -p <property names separated by comma>
The above command displays the filtered property values for all returned controller objects.
• Monitor and Inventory all batteries connected to the controller
racadm raid get batteries --refkey <controller FQDDs
separated by comma
>
The above command displays all battery keys connected to the controllers referred as refkeys.
racadm raid get batteries --refkey <controller FQDD's
separated by comma > -o
The above command is an optimized version and displays all battery objects for the controller FQDD.
racadm raid get batteries --refkey <controller FQDD's
separated by comma > -o -p <property names separated by comma>
The above command is an optimized and filtered version.
racadm raid get batteries --refkey <controller FQDD's
separated by comma > -o -p <property names separated by comma>
• Monitor and Inventory all virtual disks connected to the controller
racadm raid get vdisks --refkey <controller FQDDs
separated by comma>
The above command displays all vdisk keys connected to the controllers being mentioned as refkeys.
racadm raid get vdisks --refkey <controller FQDDs
separated by comma > -o
The above command is an optimized version and displays all vdisk objects for the controller FQDD.
racadm raid get <controller > -pending
Raid.Integrated.1-1
Raid.Slot.2-1
83