Quick Reference Guide

NOTE: IPv6 information is displayed only if IPv6 is enabled in iDRAC.
NOTE: LOM Status is displayed only for iDRAC on Rack and Tower servers and is not displayed for iDRAC
Enterprise on Blade servers.
getpbinfo
Description Displays power budget status information.
To use this subcommand, you must have CMC Login User privilege.
Synopsis
racadm getpbinfo
Example
racadm getpbinfo
[Power Budget Status]
System Input Power = 700 W
Peak System Power = 0 W
Peak System Power Timestamp = 01:08:23 01/27/2009
Minimum System Power = 0 W
Minimum System Power Timestamp = 20:18:30 01/27/2000
Overall Power Health = Not OK
Redundancy = No
System Input Power Cap = 7928 W
Redundancy Policy = None
Dynamic PSU Engagement Enabled = No
System Input Max Power Capacity = 0 W
Input Redundancy Reserve = 0 W
Input Power Allocated to Servers = 0 W
Input Power Allocated to Chassis Infrastructure = 51 watts
Total Input Power Available for Allocation = 0 W
Standby Input Power Capacity = 0 W
[Chassis Power Supply Status Table]
<Name> <Presence> <Power State> <Input Current> <Input Volts><Output Rating>
PS1 Online On
16.1 A 32 V 2360 W
PS2 Not Present Slot Empty
N/A N/A N/A
PS3 Not Present Slot Empty
N/A N/A N/A
PS4 Not Present Slot Empty
N/A N/A N/A
PS5 Not Present Slot
Empty N/A N/
A N/A
PS6 Not Present Slot
Empty N/A N/A
N/A
[Server Module Power Allocation Table]
<Slot#><Server Name><PowerState><Allocation><Priority><Blade Type>
1 SLOT-01 N/A N/A 5
N/A
2 SLOT-02 OFF 0 W 5 PowerEdgeM805
3 SLOT-03 ON 164 W 5 N/A
58