Quick Reference Guide

System.Power.Hotspare.Enable (Read/Write)
Description Enables RapidOn feature for the primary PSU selection.
NOTE: This value is supported only on iDRAC on Rack
and Tower servers.
Legal Values 0 - Disable
1- Enable
Default 0
System.Power.PFC.Enable (Read/Write)
Description Enables the power factor correction feature.
NOTE: This value is supported only on iDRAC on Rack
and Tower servers.
NOTE: This value is applicable only if
System.Power.Cap.Enable is set to 1.
Legal Values
• 0 - Disable
• 1 - Enable
Default 0
System.Power.Max.Power (Read Only)
Description This is the device Peak Power Consumption since this
value was last cleared.
Legal Values String up to 32 characters.
Default None
System.Power.Max.Amps (Read Only)
Description Specifies the device Peak Power Consumption since this
value was last cleared.
Legal Values String up to 32 characters.
Default None
System.Power.Max.Amps.TimeStamp (Read Only)
Description
Specifies the timestamp recorded for the Peak Power
Consumption since this value was last cleared.
Legal Values String up to 32 characters.
213