Quick Reference Guide

Default None
System.Power.Cap.Enable (Read/Write)
Description Enables Server Capping.
NOTE: This value is read only on Blade servers
because CMC controls the capping.
Legal Values
• 0 - Disable
• 1 - Enable
Default 0
System.Power.Cap.Watts (Read Only)
Description Represents the Maximum Power in Watts a device is
allowed to consume. The device may throttle in order to
meet this capacity.
NOTE: This value is applicable only if
System.Power.Cap.Enable is set to 1.
Legal Values None
Default None
System.Power.Cap.Btuhr (Read/Write)
Description Represents the maximum power in BTU/Hr a device is
allowed to consume. The device may throttle in order to
meet this capacity.
NOTE: This value is applicable only if
System.Power.Cap.Enable is set to 1.
Legal Values String up to 32 characters.
Default None
System.Power.Hotspare.PrimaryPSU (Read/Write)
Description Represents the primary PSU selection.
NOTE: This value is supported only on iDRAC on Rack
and Tower servers.
Legal Values Integer values 1 - 2
Default 1
212