Quick Reference Guide

4
Database Objects With Get and Set Commands
These groups and object names must be used with the get and set commands.
When addressing these objects they must begin with either a FQDD or FQDD Alias.
These groups and objects are not applicable for CMC.
System.Power
This group provides information on power management features for iDRAC.
The following section provides information about the objects in the System.Power group.
System.Power.Status (Read Only)
Description Represents the device power state, either ON or OFF.
Legal Values
• 0 - Server is off
• 1 - Server is on.
Default None
System.Power.ServerAllocation (Read Only)
Description Indicates the power allocated to running blades. This
value is displayed in both watts and BTU/h units.
Legal Values 0 - 7928
Default None
System.Power.Cap.MinThreshold (Read Only)
Description This is the lowest calculated power consumption of the
device. This is based on the current component inventory.
Legal Values None
Default None
System.Power.Cap.MaxThreshold (Read Only)
Description
This is the highest calculated power consumption of the
device. This is based on the current component inventory.
Legal Values None
211