Quick Reference Guide

cfgIPv6LanNetworking
This group is used to configure the IPv6 over LAN networking capabilities.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
NOTE: Use the -m option to apply this setting to iDRAC.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read/Write)
Description Enables or disables iDRAC or CMC IPv6 stack.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgIPv6Address
Description Assigns a static IPv6 address to the CMC. This property is used only if
cfgIPv6AutoConfig is set to 0 (false).
NOTE: This object is applicable only for CMC.
Legal Values A string representing a valid IPv6 address. For example,
2001:DB8:1234:5678:9ABC:DE11:C00C:BEEF
Default ::
cfgIPv6Address1 (Read/Write)
Description Specifies iDRAC or CMC IPv6 address.
Legal Values String representing a valid IPv6 entry.
Default ::
cfgIPv6Gateway (Read/Write)
Description iDRAC or CMC gateway IPv6 address.
NOTE: For CMC, this property is used only if
cfgIPv6AutoConfig is set to 0 (false.)
Legal Values Specifies string representing a valid IPv6 entry.
Default ::
189