Quick Reference Guide

Default The index value of a platform event filter object.
cfgIpmiPefAction (Read/Write)
Description Specifies the action that is performed on the managed
server when the alert is triggered.
NOTE: For iDRAC on Rack and Tower servers, this
object is read-only for indexes 20, 21, and 22.
Legal Values
• 0 (None)
• 1 (Power Down)
• 2 (Reset)
• 3 (Power Cycle)
Default 0
cfgIpmiPefEnable (Read/Write)
Description Enables or disables a specific platform event filter.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
cfgIpmiPet
This group is applicable only for iDRAC and is used to configure platform event traps on the managed server.
The following sections provide information about the objects in the cfgIpmiPet group.
cfgIpmiPetIndex (Read Only)
Description Unique identifier for the index corresponding to the trap.
Legal Values 1 - 4
Default The index value of a specific platform event trap.
cfgIpmiPetAlertDestIpAddr (Read/Write)
Description Specifies the destination IPv4 address for the trap
receiver on the network. The trap receiver receives an
SNMP trap when an event is triggered on the managed
server.
Legal Values A string representing a valid IPv4 address. For example,
192.168.0.67.
Default 0.0.0.0
175