Quick Reference Guide

cfgVirMediaAttached (Read/Write)
Description This object is used to attach virtual devices to the system
via the USB bus. When the devices are attached, the
server recognizes valid USB mass storage devices
attached to the system. This is equivalent to attaching a
local USB CDROM/floppy drive to a USB port on the
system. When the devices are attached, they can be
connected to the virtual devices remotely using iDRAC
Web interface or the CLI. Setting this object to 0 causes
the devices to detach from the USB bus.
Legal Values
• 0 = Detach
• 1 = Attach
• 2 = Auto-Attach
Default 0
cfgVirtualBootOnce (Read/Write)
Description Enables or disables the Virtual Media Boot Once feature
of iDRAC.
If this property is enabled when the host server is
rebooted, this feature attempts to boot from the virtual
media devices—if the appropriate media is installed in the
device.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgVirMediaFloppyEmulation (Read/Write)
Description When set to 0, the virtual floppy drive is recognized as a
removable disk by Windows operating systems. Windows
operating systems assigns a drive letter that is C: or higher
during enumeration. When set to 1, the Virtual Floppy drive
is seen as a floppy drive by Windows operating systems.
Windows operating systems assigns a drive letter of A: or
B:.
NOTE: Virtual Media has to be reattached (using
cfgVirMediaAttached) for this change to take effect.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
144