Quick Reference Guide

Default < blank >
cfgSerialConsoleColumns
Description Specifies the number of columns in the terminal window
command line connected to the serial port. You must log
out, then log in again for the changes to take effect.
This object property is applicable only for CMC.
NOTE: The prompt counts as two characters.
NOTE: The terminal emulator must be configured with
the line wrap mode ON, if a terminal emulator is used.
Legal Values 0 – 256
Default 0 (equivalent to 80)
cfgSerialHistorySize (Read/Write)
Description Specifies the maximum size
of the serial history buffer.
Legal Values 0 – 8192
Default 8192
cfgSerialCom2RedirEnable (Read/Write)
Description Enables or disables the console for COM 2 port
redirection.
The cfgSerialCom2RedirEnable object property is
applicable only for iDRAC on Rack and Tower Servers. It is
not applicable for iDRAC Enterprise on Blade Servers and
CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
cfgSerialSshEnable (Read/Write)
Description Enables or disables the
secure shell (SSH) interface
on iDRAC or CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
133