Quick Reference Guide

cfgNicUseDhcp (Read/Write)
Description Specifies whether DHCP is used to assign the iDRAC or
CMC IPv4 address. If this property is set to 1 (TRUE), then
iDRAC or CMC IPv4 address, subnet mask, and gateway
are assigned from the DHCP server on the network. If this
property is set to 0 (FALSE), the user can configure the
cfgNicIpAddress, cfgNicNetmask, and cfgNicGateway
properties.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgNicMacAddress (Read Only)
Description The iDRAC or CMC NIC MAC address in the format:
dd:dd:dd:dd:dd:dd, where d is a hexadecimal digit in range
0 - 9, A - F
Legal Values String representing iDRAC or CMC NIC MAC address.
Default The current MAC address of iDRAC or CMC NIC. For
example, 00:12:67:52:51:A3.
cfgRemoteHosts
This group provides properties that allow configuration of the SMTP server for e-mail alerts.
For CMC, this group enables/disables and configures firmware updates, NTP, remote syslogging, and SMTP email
alerting. Use the -m option to apply this setting to iDRAC.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgRemoteHosts group.
cfgRhostsFwUpdateTftpEnable (Read/Write)
Description Enables or disables iDRAC or CMC firmware update from a
network TFTP server.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
119