Quick Reference Guide

cfgDNSServersFromDHCP (Read/Write)
Description Specifies if the DNS server IPv4 addresses should be
assigned from the DHCP server on the network.
For CMC, this property is used only if cfgNicUseDhcp is
set to 1 (true).
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgDNSServer1 (Read/Write)
Description Specifies the IPv4 address for DNS server 1. This property
is only valid if cfgDNSServersFromDHCP is set to 0
(FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set
to identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgDNSServer2 (Read/Write)
Description Retrieves the IPv4 address for DNS server 2. This
parameter is only valid if cfgDNSServersFromDHCP is set
to 0 (FALSE).
NOTE: cfgDNSServer1 and cfgDNSServer2 may be set
to identical values while swapping addresses.
Legal Values String representing a valid IPv4 address. For example:
192.168.0.20.
Default 0.0.0.0
cfgNicEnable (Read/Write)
Description Enables or disables iDRAC or CMC network interface
controller. If the NIC is disabled, the remote network
interfaces to iDRAC or CMC are no longer accessible and
iDRAC or CMC are only available through the local or
serial RACADM interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
117