Quick Reference Guide

To use this subcommand, you must have Administrator
permission.
Synopsis
racadm traceroute <IPv4 address>
racadm traceroute 192.168.0.1
Input
racadm traceroute 192.168.0.1
Output
traceroute to 192.168.0.1
(192.168.0.1), 30 hops
max,
40 byte packets
1 192.168.0.1 (192.168.0.1) 0.801 ms
0.246 ms 0.253 ms
traceroute6
Description Traces the network path of routers that packets take as
they are forwarded from your system to a destination IPv6
address.
To use this subcommand, you must have Administrator
permission.
Synopsis
racadm traceroute6 <IPv6 address>
racadm traceroute fd01::1
Output
traceroute to fd01::1 (fd01::1) from
fd01::3,
30 hops
max, 16 byte packets
1 fd01::1 (fd01::1) 14.324 ms 0.26 ms
0.244 ms
usercertupload
Description Uploads a user certificate or a user CA certificate from the
client to iDRAC.
To use this subcommand, you must have Configure iDRAC
permission.
This option is applicable only to iDRAC.
Synopsis
racadm usercertupload -t <type> [-f
<filename>]
-i <index>
Input
• -t — Specifies the type of certificate to upload,
either the CA certificate or server certificate.
— 1 = user certificate
— 2 = user CA certificate
103