Owner's Manual

62 Configuring CMC to Use Command Line Consoles
Using a Serial, Telnet, or SSH Console
When you connect to the CMC command line, you can enter these commands:
Using a Telnet Console With CMC
Up to four Telnet client systems and four SSH clients may connect at any
given time.
If your management station is running Windows XP or Windows 2003, you
may experience an issue with the characters in a CMC Telnet session. This
issue may occur as a frozen login where the return key does not respond and
the password prompt does not appear.
To fix this issue, download hotfix 824810 from the Microsoft Support website
at support.microsoft.com. For more information, see Microsoft Knowledge
Base article 824810.
Table 3-1. CMC Command Line Commands
Command Description
racadm RACADM commands begin with the keyword racadm and are
followed by a subcommand, such as getconfig, serveraction, or
getsensorinfo. For details on using RACADM, see "Using the
RACADM Command Line Interface" on page 75.
connect Connects to the serial console of a server or I/O module. For help
using the connect command, see "Connecting to Servers or I/O
Modules With the Connect Command" on page 67.
NOTE: The racadm connect command can also be used.
exit, logout,
and quit
These commands all perform the same action: they end the current
session and return to a login prompt.