Owner's Manual

6 Contents
4 Using the RACADM Command
Line Interface . . . . . . . . . . . . . . . . . . . . . 75
Using a Serial, Telnet, or SSH Console . . . . . . . . . 75
Logging in to CMC
. . . . . . . . . . . . . . . . . . 76
Starting a Text Console . . . . . . . . . . . . . . . 76
Using RACADM. . . . . . . . . . . . . . . . . . . . . . 76
RACADM Subcommands
. . . . . . . . . . . . . . 77
Accessing RACADM Remotely . . . . . . . . . . . 81
Enabling and Disabling the RACADM
Remote Capability
. . . . . . . . . . . . . . . . . . 82
Using RACADM Remotely. . . . . . . . . . . . . . 82
RACADM Error Messages
. . . . . . . . . . . . . 83
Using RACADM to Configure CMC
. . . . . . . . . . . . 83
Configuring CMC Network Properties. . . . . . . . . . 83
Setting Up Initial Access to CMC
. . . . . . . . . . 84
Viewing Current Network Settings . . . . . . . . . 85
Configuring the Network LAN Settings
. . . . . . . 85
Configuring the Network Security
Settings (IPv4 Only) . . . . . . . . . . . . . . . . . 92
Using RACADM to Configure Users
. . . . . . . . . . . 93
Adding a CMC User
. . . . . . . . . . . . . . . . . 94
Using RACADM to Configure Public Key
Authentication over SSH
. . . . . . . . . . . . . . . . . 95
Generating Public Keys for Windows
. . . . . . . . 96
Generating Public Keys for Linux
. . . . . . . . . . 97
RACADM Syntax Notes for CMC
. . . . . . . . . . 97
Viewing the Public Keys
. . . . . . . . . . . . . . 97
Adding the Public Keys
. . . . . . . . . . . . . . . 98
Deleting the Public Keys
. . . . . . . . . . . . . . 98