Owner's Manual

50 Installing and Setting Up CMC
You can also configure iDRAC from the CMC GUI.
11 Select the Internet Protocol (IPv4, IPv6, or both) that you want to use for
the servers.
Dynamic Host
Configuration
Protocol
(DHCP)
iDRAC retrieves IP configuration (IP address, mask, and
gateway) automatically from a DHCP server on your
network. The iDRAC is assigned a unique IP address allotted
over your network.Press the center button.
Static You manually enter the IP address, gateway, and subnet mask
in the screens immediately following.
If you have selected the Static option, press the center
button to continue to the next iDRAC Network Settings
screen, then:
a Set the Static IP Address by using the right or left arrow
keys to move between positions, and the up and down
arrow keys to select a number for each position.
This address is the static IP of the iDRAC located in
the first slot. The static IP address of each subsequent
iDRAC is calculated as a slot number increment of this IP
address. When you have finished setting the
Static IPAddress , press the center button to continue.
b Set the subnet mask, and then press the center button.
c Set the gateway, and then press the center button.