Owner's Manual

436 Troubleshooting and Recovery

racadm getsysinfo

To view the iKVM summary, type:

racadm getkvminfo

To view the IOM summary, type:

racadm getioinfo

Viewing Chassis and Component Health Status

Using the Web Interface

To view chassis and component health summaries:

Select

Chassis

in the system tree. The

Chassis Health

page displays.

The Chassis Graphics section provides a graphical view of the front and

rear of the chassis. This graphical representation provides a visual

overview of the components installed within the chassis and its

corresponding status.

Each graphic displays a real-time representation of the installed

components. The component state is indicated by the overlay of the

component subgraphic.

• No overlay - the component is present, powered on and

communicating with CMC; there is no indication of an adverse

condition.

• Amber caution sign - indicates that only warning alerts have been

issued and that corrective action must be taken.

• Red X - indicates at least one failure condition is present. This means

that CMC can still communicate with the component and that the

health status is reported as critical.

• Grayed Out - indicates that the component is present and not

powered on. It is not communicating with CMC and there is no

indication of an adverse condition.

All components display a corresponding text hint or screen tip when the

mouse is placed over the component subgraphic. Component status is