Owner's Manual

432 Troubleshooting and Recovery
Deleting jobs
The Delete operation is the default operation and enables you to delete all or
individual jobs on the server(s). The delete operation removes the selected
jobs from the Lifecycle Controller job queue. The checkbox following the
Model field enables selection of all the jobs on a server. Individual jobs can be
selected by using the checkboxes following the job status field.
Purging jobs
The Purge operation may sometimes be necessary when an existing job(s) is
in an undetermined state and cannot be deleted using the Delete Jobs
operation. The Purge operation resets the Data Management Service and
removes all jobs from the server and can take several minutes to complete.
The checkbox following the Model field enables selection of all jobs for the
Purge operation.
NOTE: Do not navigate away from the page after submitting an operation for
scheduling.
Viewing Chassis Summaries
CMC provides rollup overviews of the chassis, active and standby CMCs,
iKVM, fans, temperature sensors, and I/O modules (IOMs).
Using the Web Interface
To view summaries of the chassis, CMCs, iKVM, and IOMs:
1
Log in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click the Summary tab. The Chassis Summary page displays.