Owner's Manual

418 Troubleshooting and Recovery
You can add and configure SNMP alerts using the Web interface or
RACADM.
Using the Web Interface
NOTE: To add or configure SNMP alerts, you must have Chassis Configuration
Administrator privilege.
NOTE: For added security, it is strongly recommended that you change the default
password of the root (User 1) account. The root account is the default
administrative account that ships with CMC. To change the default password for the
root account, click User ID 1 to open the User Configuration page. Help for that
page is available through the Help link at the top right corner of the page.
IOM Absent An expected IOM is not present.
IOM Failure The IOM is not functioning.
Firmware Version Mismatch There is a firmware mismatch for the chassis or server
firmware.
Chassis Power Threshold
Error
Power consumption within the chassis reached the
System Input Power Cap.
SDCARD Absent There is no media in the CMC’s Secure Digital (SD)
card slot, and a configured CMC feature requires it.
SDCARD Error An error occurred while accessing the media in the
CMC's Secure Digital (SD) card slot.
Chassis Group Error The chassis group has a configuration error.
Server Sleeve Absent A server sleeve is removed.
Fabric Mismatch A fabric mismatch is reported.
Table 12-2. Chassis Events That Can Generate SNMP and Email Alerts
(continued)
Event Description