Owner's Manual

392 Using the iKVM Module
Updating the iKVM Firmware
You can update the iKVM firmware using the CMC Web interface or
RACADM.
To update the iKVM firmware using the CMC Web interface:
1
Log in to the CMC Web interface.
2 Click Chassis in the system tree.
3 Click the Update tab. The Updatable Components page displays.
4 Click the iKVM name. The Firmware Update page appears.
5 In the Firmware Image field, enter the path to the firmware image file on
your management station or shared network, or click
Browse to navigate to
the file location.
NOTE: The default iKVM firmware image name is ikvm.bin; however, the iKVM
firmware image name can be changed by the user.
6 Click Begin Firmware Update . A dialog box prompts you to
confirm the action.
Front Panel
USB/Video Enabled
Displays whether the front panel VGA connector is enabled
(Yes or No).
Allow access to CMC
from iKVM
Indicates whether the CMC command console through iKVM
is enabled (Yes or No).
Table 10-5. iKVM Status Information
(continued)
Item Description