Owner's Manual

386 Using the iKVM Module
Scanning Your System
In scan mode, the iKVM automatically scans from slot to slot (server to
server). You can scan up to 16 servers by specifying which servers you want to
scan and the number of seconds that each server is displayed.
To add servers to the scan list:
1
Press <Print Screen>. The Main dialog box appears.
2 Click Setup and then Scan . The Scan dialog box appears, listing of all
servers in the chassis
.
3 Select the box next to the servers you wish to scan.
or
Double-click the server name or slot.
or
Press <Alt > and the number of the server you wish to scan. You can select
up to 16 servers.
4 In the Time field, enter the number of seconds (3 through 99) that you
want iKVM to wait before the scan moves to the next server in the
sequence.
5 Click the Add/Remove button, and click OK .
To remove a server from the Scan list:
1
In the Scan dialog box, select the box next to the server to be removed.
or
Double-click the server name or slot.
or
Click the
Clear button to remove all servers from the Scan list.
2 Click the Add/Remove button, and click OK .