Owner's Manual

384 Using the iKVM Module
Exiting Screen Saver Mode
To exit screen saver mode and return to the Main dialog box, press any key
or move your mouse.
To turn off the screen saver:
In the Security dialog box, clear the Enable Screen Saver box and click OK.
To immediately turn on the screen saver, press <Print Screen>,
then press <Pause>.
Clearing a Lost or Forgotten Password
When the iKVM password is lost or forgotten, you can reset it to the
iKVM factory default, and then change the password. You can reset
the password using either the CMC Web interface or RACADM.
To reset a lost or forgotten iKVM password using the CMC Web interface:
1
Log in to the CMC Web interface.
2 Select iKVM from the Chassis submenu.
3 Click the Setup tab. The iKVM Configuration page displays.
4 Click Restore Default Values .
You can then change the password from the default using OSCAR.
See "Setting or Changing the Password."
To reset a lost or forgotten password using RACADM, open a
serial/Telnet/SSH text console to CMC, log in, and type:
racadm racresetcfg -m kvm
NOTE: Using the racresetcfg command resets the Front Panel Enable and Dell
CMC Console Enable settings, if they are different from the default values.
For more information about the racresetcfg subcommand, see the racresetcfg
section in the RACADM Command Line Reference Guide for iDRAC6 and
CMC.