Owner's Manual

382 Using the iKVM Module
4 For Mode : If your monitor is ENERGY STAR compliant, select Energy ;
otherwise select
Screen .
NOTE: If the mode is set to Energy, the appliance puts the monitor into sleep
mode. This is normally indicated by the monitor powering off and the amber
light replacing the green power LED. If the mode is set to Screen, the OSCAR
flag bounces around the screen for the duration of the test. Before the test
starts, a warning popup box displays the following message: "Energy mode
may damage a monitor that is not ENERGY STAR compliant. However, once
started, the test can be quit immediately via mouse or keyboard interaction."
CAUTION: Monitor damage may result from the use of Energy mode with
monitors not compliant with Energy Star.
5 Optional: To activate the screen saver test, click Test . The Screen Saver
Test
dialog box displays. Click OK to start the test.
The test takes 10 seconds. When it concludes, you are returned to the
Security dialog box.
Logging In
To launch Oscar:
1
Press <Print Screen> to launch OSCAR. The Password dialog box
appears.
2 Type your password and then click OK . The Main dialog box appears.
Setting Automatic Logout
You can set OSCAR to automatically log out of a server after a period of
inactivity.
1
In the Main dialog box, click Setup and then Security .
2 In the Inactivity Time field, enter the length of time you want to stay
connected to a server before it automatically disconnects you.
3 Click OK .