Owner's Manual

340 Power Management
To view health status for all PSUs using Chassis Graphics:
1
Log in to the CMC Web interface.
2 The Chassis Status page is displayed. The lower section of Chassis
Graphics
depicts the rear view of the chassis and contains the health status
of all PSUs. PSU health status is indicated by the color of the PSU
subgraphic:
• Green — PSU is present, powered on and communicating with CMC;
there is no indication of an adverse condition.
• Amber — Indicates a PSU failure. See the CMC log for details on the
failure condition.
• Gray — Occurs during PSU initialization and when the PSU is set to
standby, during Chassis power up, or PSU insertion. PSU is present
and not powered on. There is no indication of an adverse condition.
3 Use the cursor to hover over the an individual PSU subgraphic and a
corresponding text hint or screen tip is displayed. The text hint provides
additional information on that PSU.
4 The PSU subgraphic is hyperlinked to the corresponding CMC GUI page
to provide immediate navigation to the
Power Supply Status page
for all PSUs.
To view the health status of the PSUs using Power Supply Status:
1
Log in to the CMC Web interface.
2 Select Power Supplies in the system tree. The Power Supply Status
page displays.
Table 9-6 and Table 9-7 provide descriptions of the information provided on
the Power Supply Status page.
Table 9-6. Power Supplies
Item Description
Name Displays the name of the power supply unit: PS-[n], where [n] is
the power supply number.
Present Indicates whether the PSU is Present or Absent.