Owner's Manual

262 Using FlexAddress
Deactivating
FlexAddress feature
with chassis powered
ON.
$racadm feature -d
-c flexaddress
ERROR: Unable to
deactivate the
feature because the
chassis is powered
ON
Guest user tries to
deactivate the
feature on the
chassis.
$racadm feature -d
-c flexaddress
ERROR: Insufficient
user privileges to
perform operation
Changing the
slot/fabric
FlexAddress settings
while the server
modules are powered
ON.
$racadm setflexaddr -i
1 1
ERROR: Unable to
perform the set
operation because
it affects a
powered ON server
Why, after disabling
only the
FlexAddressPlus
feature (leaving
FlexAddress still
activated), does the
racadm setflexaddr
command on the
(still-active) CMC
fail?
If the CMC subsequently
becomes active, with the
FlexAddressPlus feature
card still in its cardslot, the
FlexAddressPlus feature is
re-activated, and slot/fabric
flexaddress configuration
changes can resume.
Table 6-2. FlexAddress Commands and Output
(continued)
Situation Command Output