Owner's Manual

226 Using the CMC Web Interface
Set iDRAC Root
Password on Server
Insertion
Specifies whether a server’s iDRAC root password should be
changed to the value provided in the iDRAC Root
Password text box when the server is inserted.
iDRAC Root Password When Set iDRAC Root Password on Server Insertion and
QuickDeploy Enabled are checked, this password value is
assigned to a server's iDRAC root user password when the
server is inserted into chassis. The password can have 1 to
20 printable (including spaces) characters.
Confirm iDRAC Root
Password
Verifies the password entered into the iDRAC Root
Password field.
Enable iDRAC LAN Enables/disables the iDRAC LAN channel.
Default: Unchecked (disabled)
Enable iDRAC IPv4 Enables/disables IPv4 on iDRAC. Default setting is
enabled.
Enable iDRAC IPMI
over LAN
Enables/disables the IPMI over LAN channel for each
iDRAC present in the chassis.
Default: Unchecked (disabled)
Enable iDRAC DHCP Enables/disables DHCP for each iDRAC present in the
chassis. If this option is enabled, the fields QuickDeploy IP,
QuickDeploy Subnet Mask, and QuickDeploy Gateway
are disabled, and can not be modified since DHCP is used
to automatically assign these settings for each iDRAC.
Default: Unchecked (disabled)
Table 5-61. QuickDeploy Settings
(continued)
Setting Description