Owner's Manual

Using the CMC Web Interface 207
Viewing the Current Firmware Versions
The Update page displays the current version of all the updatable
components in the chassis. These may include the iKVM firmware, active
CMC firmware, (if applicable) the standby CMC firmware, the iDRAC
firmware, and the IOM infrastructure device firmware. For more information,
see "Updating the IOM Infrastructure Device Firmware" on page 211.
If the chassis contains an earlier generation server whose iDRAC is in recovery
mode or if CMC detects that iDRAC has corrupted firmware, then the earlier
generation iDRAC is also listed on the Firmware Update page. For the steps
to recover iDRAC firmware using CMC, see "Recovering iDRAC Firmware
Using CMC" on page 213.
To view the chassis components that can be updated:
1
Log in to the Web interface. For more information, see "Accessing the
CMC Web Interface" on page 111.
2 Click Chassis Controller in the system tree.
3 Click the Update tab.
The
Firmware Update page is displayed.
To open an update page for selected devices:
1
In the Firmware Update page, click on the required device name or select
the
Select/Deselect All option.
2 Click Apply Update.
An update page for the selected devices is displayed.
To view the updatable server components:
1
Log in to the Web interface. For more information, see "Accessing the
CMC Web Interface" on page 111.
2 Click Server Overview in the system tree.
3 Click the Update tab.
The
Server Component Update page is displayed. This page displays all
the updatable server components.