Owner's Manual

Using the CMC Web Interface 171
Listed below are the privileges and the actions on the server to
which the Server Administrator is entitled. These rights are
applied only when the chassis user does not have the Server
Administrative privilege on the chassis.
Server
Administrator
(continued)
Server Configuration Administrator:
•Set IP address
•Set gateway
• Set subnet mask
•Set first boot device
Configure Users:
•Set iDRAC root password
•iDRAC reset
Server Control Administrator:
•Power on
•Power off
• Power cycle
•Graceful shutdown
• Server Reboot
Test Alert User User can send test alert messages.
Debug
Command
Administrator
User can execute system diagnostic commands.
Fabric A
Administrator
User can set and configure the Fabric A IOM, which resides in
either slot A1 or slot A2 of the I/O slots.
Fabric B
Administrator
User can set and configure the Fabric B IOM, which resides in
either slot B1 or slot B2 of the I/O slots.
Fabric C
Administrator
User can set and configure the Fabric C IOM, which resides in
either slot C1 or slot C2 of the I/O slots.
Table 5-42. User Types (continued)
Privilege Description