Owner's Manual

142 Using the CMC Web Interface
You can also view the server status page by clicking the status link in the
server Quick Links on the right side of the page.
Table 5-27. Individual Server Status - Properties
Item Description
Slot Displays the slot occupied by the server on the chassis.
Slot numbers are sequential IDs, from 1 through 16 (there are
16 slots available on the chassis), that help identify the location
of the server in the chassis.
Slot Name Displays the name of the slot where the server resides.
Present Displays whether the server is present in the slot (Yes or No). When
the server is absent, the health, power state, and service tag
information of the server is unknown (not displayed).
Health OK Displays that the server is present and
communicating with CMC. In the event of a
communication failure between CMC and the
server, CMC cannot obtain or display health
status for the server.
Informational Displays information about the server when no
change in health status (OK, Warning,
Critical) has occurred.
Warning Displays that only warning alerts have been
issued, and corrective action must be taken.
If corrective actions are not taken, then critical
failures that can affect the integrity of the
server may occur.
Critical Displays that at least one Failure alert has been
issued. Critical status represents a system
failure on the server, and corrective action must
be taken immediately.
No Value When the server is absent from the slot,
health information is not provided.
Server Model
Displays the model of the server in the chassis.
Examples: PowerEdge M600, PowerEdge M605.