Owner's Manual

Using the CMC Web Interface 141
• Red X - indicates at least one failure condition is present. This means
that CMC can still communicate with the component and that the
health status is reported as critical.
• Grayed out - indicates that the component is present and not powered
on. It is not communicating with CMC and there is no indication of
an adverse condition.
2 Move the cursor to hover over an individual server subgraphic.
A corresponding text hint or screen tip is displayed. The text hint provides
additional information on that server.
3 Click the server subgraphic to select that server’s information and display
Quick Links on the right of the chassis graphics.
The Server Status page (separate from the Servers Status page) provides an
overview of the server and a launch point to the Web interface for the
Integrated Dell Remote Access Controller (iDRAC), which is the firmware
used to manage the server.
NOTE: To use the iDRAC user interface, you must have an iDRAC user name and
password. For more information about iDRAC and the using the iDRAC Web
interface, see the
Integrated Dell Remote Access Controller Firmware User’s Guide .
To view the health status of an individual server:
1
Log in to the CMC Web interface.
2 Expand Server Overview in the system tree.
All of the servers (1–16) appear in the expanded
Servers list.
3 Click the server (slot) you want to view.
The
Server Status page is displayed.