Owner's Manual

Using the CMC Web Interface 133
The Chassis Health page provides an overall health status for the chassis,
active and standby CMCs, sever modules, IO Modules (IOMs), fans, iKVM,
power supplies (PSUs), and LCD assembly. Detailed information for each
component is displayed by clicking on that component. For instructions on
viewing chassis and components summaries, see "Viewing Chassis
Summaries" on page 432.
Viewing Power Budget Status
The Power Budget Status page displays the power budget status for the
chassis, servers, and chassis power supply units (PSUs).
For instructions on viewing power budget status, see "Viewing Power
Consumption Status" on page 342. For more information about CMC power
management, see "Power Management" on page 319.
Viewing Server Model Name and Service Tag
The Model Name and Service Tag of each server can be obtained instantly
using the following steps:
• Expanding Servers in the System tree. All the servers (1-16) appear in the
expanded Servers list. A slot without a server has its name grayed out.
• Using the cursor to hover over the slot name or slot number of a server;
a tool tip is displayed with the server’s model name and service tag (if
available).
Viewing the Health Status of All Servers
You can view the health status for all servers from the Chassis Graphics
section on the Chassis Health page or the Servers Status page.
The Chassis Graphics provides a graphical overview of all servers installed in
the chassis.