Owner's Manual

120 Using the CMC Web Interface
Launching a Member Chassis’s or Server’s web page
Links to a member chassis’s web page, a server’s Remote Console or the
Server iDRAC’s web page within the group are available through the lead
chassis’s group page. You can use the same user name and password that was
used to log in to the lead Chassis, to log in to the member device. If the
member device has the same login credentials then no additional login is
required. Otherwise, the user is directed to the member device’s login page.
To navigate to member devices:
1
Login to the lead chassis.
2 Select Group: name in the tree.
3 If a member CMC is the required destination then select Launch CMC
below the desired chassis.
If a server in a chassis is the required destination then:
a Select the image of the destination chassis.
b In the chassis image that appears below the Health and Alerts pane,
select the server.
c In the box labeled Quick Links, select the destination device.
A new window is displayed with the destination page or login screen.
Synchronizing a New Member With Leader Chassis Properties
You can apply the properties from the leader to a newly added member
chassis of a group. To synchronize a new member with the leader properties:
1
Login with administrator privileges to the leader chassis.
2 Select the Lead chassis in the tree.
3 Click Setup  Group Administration .
4 While adding a new member to the group, in the Chassis Group page,
select
Sync New Member with Leader Properties.
5 Click Apply .
The member takes on the properties of the leader.