Owner's Manual

Using the CMC Web Interface 111

Using the CMC Web Interface

CMC provides a Web interface that enables you to configure CMC

properties and users, perform remote management tasks, and troubleshoot a

remote (managed) system for problems. For everyday chassis management,

use the CMC Web interface. This chapter provides information about how to

perform common chassis management tasks using the CMC Web interface.

You can also perform all configuration tasks using local RACADM commands

or command line consoles (serial console, Telnet, or SSH). For more

information about using local RACADM, see "Using the RACADM

Command Line Interface" on page 75. For more information on using

command line consoles, see "Configuring CMC to Use Command Line

Consoles" on page 61.

NOTE: If you are using Microsoft Internet Explorer, connecting through a proxy,

and if you see the error "The XML page cannot be displayed," you need to disable

the proxy to continue.

Accessing the CMC Web Interface

To access the CMC Web interface over IPv4:

Open a supported Web browser window.

For the latest information on supported Web browsers, see the

Dell Systems Software Support Matrix located at

support.dell.com/manuals.

Type the following URL in the Address field, and then press <Enter>:

https://<CMC IP address>

If the default HTTPS port number (port 443) has been changed:

https://<CMC IP address>:<port number>

where <

CMC IP address

> is the IP address for CMC and <

port number

is the HTTPS port number.

The

CMC Login

page appears.