Owner's Manual

Using the RACADM Command Line Interface 101
•Use the racresetcfg subcommand to configure both CMCs with
identical properties.
Use the
racresetcfg subcommand to reset the CMC to original
defaults, and then run the
racadm config -f <filename>.cfg
command. Ensure that the .cfg file includes all desired objects, users,
indexes, and other parameters. For a complete list of objects and groups,
see the database property chapter of the
RACADM Command Line
Reference Guide for iDRAC6 and CMC
.
CAUTION: Use the racresetcfg subcommand to reset the database and
the CMC Network Interface settings to the original default settings and remove all
users and user configurations. While the root user is available, other users’
settings are also reset to the default settings.
Parsing Rules
• Lines that start with a hash character (#) are treated as comments.
A comment line must start in column one. A "#" character in any other
column is treated as a # character.
Some modem parameters may include # characters in their strings.
An escape character is not required. You may want to generate a
.cfg from
a
racadm getconfig -f <filename>.cfg command, and then
perform a
racadm config -f <filename>.cfg command to
a different CMC, without adding escape characters.
For Example:
#
# This is a comment
[cfgUserAdmin]
cfgUserAdminPageModemInitString=<Modem init # not
a comment>