Owner's Manual

What’s New
This release of CMC supports the following features:
 Broadcom 5719 Quad Port 1GB Blade Mezzanine Card.
 Expanded the CMC MIB to contain OIDs for a maximum of 32 servers in the chassis.
 Expanded the CMC MIB to contain OIDs for each server's Chassis Slot number, for all servers
present in the chassis.
 Expanded the CMC MIB to contain an OID for the iKVM Version number, if iKVM is present in the
chassis.
 Support for iDRAC7 PowerEdge M420 server.
Prerequisites
Supported System
CMC version 4.1 is supported on the following Dell PowerEdge(TM) systems in the Dell PowerEdge M1000e
system enclosure:
 Dell PowerEdge M420
 Dell PowerEdge M520
 Dell PowerEdge M600
 Dell PowerEdge M605
 Dell PowerEdge M610
 Dell PowerEdge M610X
 Dell PowerEdge M620
 Dell PowerEdge M710
 Dell PowerEdge M710HD
 Dell PowerEdge M805
 Dell PowerEdge M905
 Dell PowerEdge M910
 Dell PowerEdge M915
Recommended Module Firmware Versions
The following chassis module firmware versions are recommended additionally if CMC version 4.1 is
installed:
 iDRAC Firmware Version:
- 3.35 for Dell PowerEdge M610, M610X, M710, M710HD, M910, M915
- 1.60 for Dell PowerEdge M600, M605, M805, M905
 iDRAC7 Firmware Version:
- 1.00 for Dell PowerEdge M620
- 1.10.10 for Dell PowerEdge M420