Quick Reference Guide

Example

racadm iping6 10.9.72.254

IPING6 10.9.72.254 (10.9.72.254): 56

data bytes

64 bytes from 10.9.72.254: icmp_seq=0

ttl=121 time=2.9

--- 10.9.72.254 ping statistics ---

1 packets transmitted, 1 packets

received, 0 percent

packet loss

round-trip min/avg/max = 2.9/2.9/2.9 ms

racdump

Description Provides a single command to get dump, status, and

general iDRAC board information.

For CMC, this subcommand displays the comprehensive

chassis status and configuration state information, as well

as historic event logs. Used for post deployment

configuration verification and during debugging sessions.

To use this subcommand for CMC you must have

Administrator privilege and for iDRAC you must have

Debug permission.

Synopsis

racadm racdump

Input Racdump includes the following subsystems and

aggregates the following RACADM commands:

• General System/RAC information - getsysinfo

• Session information - getssinfo

• Sensor information - getsensorinfo

• Switches information (IO Module) - getioinfo

• Mezzanine card information (Daughter card) -

getdcinfo

• All modules information - getmodinfo

• Power budget information - getpbinfo

• KVM information - getkvminfo

• NIC information (CMC module) - getniccfg

• Redundancy information - getredundancymode

• Trace log information - gettracelog

• RAC event log - getraclog

• System event log - getsel

Output The following information is displayed when the racdump

subcommand is processed:

• General system/RAC information

• Coredump

• Session information