Quick Reference Guide

• Displays the statistics for the integrated NIC.
$ racadm nicstatistics NIC.Integrated.1-1
Total Bytes Received:0
Total Bytes Transmitted: 0
Total Unicast Bytes Received: 0
Total Multicast Bytes Received: 0
Total Broadcast Bytes Received: 0
Total Unicast Bytes Transmitted: 0
• Get the network statistics
$ racadm nicstatistics
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:10
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:11
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:12
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:13
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:14
ping
Description Verifies that the destination IP address is reachable from
iDRAC with the current routing-table contents. A
destination IP address is required. An ICMP echo packet
is sent to the destination IP address based on the current
routing-table contents.
To use this subcommand, you must have Execute
Diagnostic Commands or Configure iDRAC permission.
Synopsis
racadm ping <ipaddress>
ping6
Description Verifies that the destination IPv6 address is reachable
from iDRAC or CMC or with the current routing-table
contents. A destination IPv6 address is required. An ICMP
echo packet is sent to the destination IPv6 address based
on the current routing-table contents.
To use this subcommand for CMC you must have
Administrator privilege for CMC and for iDRAC you must
have Execute Diagnostic Commands or Configure iDRAC
permission.
Synopsis
racadm ping6 <ipv6address>
79