Quick Reference Guide

NIC4 Ethernet = 00:24:e8:2e:c5:d1

iSCSI = 00:24:e8:2e:c5:d2

Watchdog Information:

Recovery Action = None

Present countdown value = 15 seconds

Initial countdown value = 15 seconds

Examples

• racadm getsysinfo -A -s

"System Information:" "PowerEdge 2900" "A08" "1.0" "EF23VQ-0023"

"Hostname"

"Microsoft Windows 2000 version 5.0, Build Number 2195, Service Pack 2"

"ON"

• racadm getsysinfo -w -s

System Information:

System Model = PowerEdge 2900

System Revision = I

System BIOS Version = 0.2.3

BMC Firmware Version = 0.17

Service Tag = 48192

Host Name = racdev103

OS Name = Microsoft Windows Server 2003

Power Status = OFF

Watchdog Information:

Recovery Action = None

Present countdown value = 0 seconds

Initial countdown value = 0 seconds

gettracelog

Description Lists all the trace log entries in the DRAC.

To use this subcommand, you must have Login to iDRAC permission.

Synopsis

• racadm gettracelog -i[-A]

• racadm gettracelog [-s <start>] [-c <count>] [--

more] [-A] [-o]

Input

• -i - Displays the number of entries in iDRAC trace log.

• --more - Displays one screen at a time and prompts the user to continue (similar

to the UNIX more command).

• -o - Displays each entry in a single line.

• -c - Specifies the number of records to display.

• -s - Specifies the starting record to display.

• -A - Does not display headers or labels.

Output The default output display shows the record number, timestamp, source, and

description. The timestamp begins at midnight, January 1 and increases until the system

boots. After the system boots, the system’s timestamp is used.