Quick Reference Guide

Server-7 Present ON OK

Server-8 Not Present N/A N/A N/A

Server-9 Not Present N/A N/A N/A

Server-10 Extension(2) N/A N/A N/A

Server-11 Not Present N/A N/A N/A

Server-12 Present ON OK

Server-13 Not Present N/A N/A N/A

Server-14 Present ON OK 0000015

Server-15 Present ON OK

Server-16 Present ON OK

KVM Present ON OK

IO-Cable Present ON OK ABC1234

FPC-Cable Present ON OK ABC1234

NOTE: For CMC (only) a power state of "Primary" denotes Active CMC.

getniccfg

Description Displays the current NIC settings.

To use this subcommand, you must have Login to iDRAC

permission.

Synopsis

racadm getniccfg

Input

racadm getniccfg

Example

racadm getniccfg

Output

The getniccfg subcommand displays an appropriate error message if the operation is not successful. Otherwise, on

success, the output is displayed in the following format:

IPv4 settings:

NIC Enabled = 1

IPv4 Enabled = 1

DHCP Enabled = 1

IP Address = 10.35.0.64

Subnet Mask = 255.255.255.0

Gateway = 10.35.0.1