Quick Reference Guide

Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
• -m < module > — Specifies the module whose
configuration and status information you want to
view. The default command (no options) displays
information about all major components in the
chassis.
<module > may be any of the following values:
— server-n where n=1–16
— switch-n where n=1–6
— CMC-n where n=1–2
— fan-n where n=1–9
— ps-n where n=1–6
— chassis
— kvm
— io-cable
— fpc-cable
• -A — Suppresses headers and labels in the
output.
Example
racadm getmodinfo -m switch-1
<module> <presence> <pwrState> <health> <svcTag> Switch-1
Present ON OK CG09074
racadm getmodinfo
<module> <presence> <pwrState> <health> <svcTag>
Chassis Present ON Not OK ABC1234
Fan-1 Present ON OK
Fan-2 Present ON OK
Fan-3 Present ON OK
Fan-4 Present ON OK
Fan-5 Present ON OK
Fan-6 Present ON OK
Fan-7 Present ON OK
Fan-8 Present ON OK
Fan-9 Present ON OK
PS-1 Present Online OK
PS-2 Not Present N/A N/A N/A
PS-3 Present Online OK
PS-4 Not Present N/A N/A N/A
PS-5 Not Present N/A N/A N/A
PS-6 Not Present N/A N/A N/A
CMC-1 Present Primary OK N/A
CMC-2 Not Present N/A N/A N/A
Switch-1 Not Present N/A N/A N/A
Switch-2 Not Present N/A N/A N/A
Switch-3 Not Present N/A N/A N/A
Switch-4 Not Present N/A N/A N/A
Switch-5 Not Present N/A N/A N/A
Switch-6 Not Present N/A N/A N/A
Server-1 Not Present N/A N/A N/A
Server-2 Present OFF OK
Server-3 Present ON OK S YW
Server-4 Present ON OK
Server-5 Present ON OK
Server-6 Present ON OK 1234567
56